Yes, just switch the voltage selector on the rear panel to match the AC power in your country before powering them on. We recommend changing the fuse when using a different voltage. For 220 volts, here’s the value you would need:5mm x 20mm – 1.6 amps @ 250 volts – slow blow fuse. The power […]
The A5+ Classic was designed with the user’s listening experience in mind and are not marketed as pro audio mixing monitors. However, Audioengine has its roots in the studio monitor world and the A5+ Classic is quite good for this purpose. We’ve had customers tell us they use these for nearfield listening and music editing […]
This is normal; the volume control for the A5+ series is a digital encoder, and uses a micro-processor to attenuate the volume. The light on the front of the speakers should flash as you adjust the volume up and down; once the speakers have reached minimum or maximum volume, the light will remain solid and […]
Our woofers are made of aramid fiber and the tweeter domes are silk. Both of these materials are very robust and can handle quite a bit, therefore we decided against grill covers for the A5+ Classic as they tend to negatively color the sound. Even though our speakers do not have grills they are still […]
Yes, you can use multiple W3 sets (up to 8) to send stereo audio to different locations or up to 3 receivers with one sender unit.
It is normal for the D3 to be warm/hot to the touch as the outer case was designed to work as a heat-sink.
Most of the USB ports on TVs and such are not meant for audio output, but serve other functions. As electronic components evolve, this may not always be the case. Check your operating manual for your device to see if the device supports USB audio. If so, the D3 may work, but as of late […]
When connected via USB with a computer, the D3 acts like a USB sound-card. Because of this, once it’s set as your default playback device, it should work with any application on your computer playing audio, and with any file format the software supports.
In the Foobar control panel, under Preferences->Output, set the buffer length to minimum. A few customers have mentioned that WASAPI mode is more stable when used under WinAmp, so try that as well.
If using a Mac, open the Audio MIDI Setup utility in Applications->Utilities, choose “Audioengine D3” under audio devices and check that the format is set to 96 and the bit depth is set to 24bit. Also a quick check is to simply observe the HD indicator on the D3 while music is playing. If the […]
