Sure. Connect the W3 Sender to the subwoofer outputs on your A/V receiver and then connect the W3 Receiver to the audio inputs on your subwoofer. There are stereo 1/8″ mini-jack inputs and outputs on the W3 that will allow you to make an RCA connection with the use of a Y-cable (which is included).
Yes, simply connect the W3 Sender to the rear channel preamp outputs on your surround receiver then connect the W3 Receiver to an input on Audioengine or any other powered speakers. The W3 has stereo (1/8″) inputs and outputs that will also connect to RCA connector with the use of the included RCA Y-cable adapter.
Yes, each Sender/Receiver W3 pair transmits uncompressed stereo audio from a computer or any analog audio output.
The W3 is based on a proprietary wi-fi technology that uses the same frequency bands as 802.11.
No! You don’t need a computer to send wireless stereo audio – just power for the W3 Sender and Receiver dongles and RCA or mini-jack inputs and outputs on your music gear.
The W3 essentially acts as your computer’s sound card; so it is an either/or option, you either select your internal sound card to use or the W3. To use your computer speakers you simply select the sound card in your device settings or remove the W3 sender unit from your computer.
The W3 is a USB Plug-and-Play audio device. This means that the drivers it uses are developed and provided by the developer of your computer’s operating system. In the case of a Windows PC for example, these drivers are provided by Microsoft, and are a part of Windows.
The W3 is a USB Plug-and-Play audio device. which means that the drivers it uses are developed and provided by the developer of your computer’s operating system. Because of this, you shouldn’t need to download or upgrade any drivers to use your W3.
Yes, both wireless adapters transmit any audio file format with no compression or loss.
Yes, each Sender/Receiver W3 pair transmits 16-bit stereo audio.
