Yes! The replacement remote you can find on our webstore is the exact same remote that comes standard with our HD6 speakers. Even though the replacement remote is the HD6 remote, it will work just fine as a replacement for the A5+s.
The best way to attach the plug into the USB adapter is to go in at an angle. The plastic on the plug should have a more rounded side; we would suggest putting that side in first and then push down the other end (you may need to pull the tab out to make it […]
Setting up your Bluetooth turntable with your Bluetooth-ready Audioengine speakers/components should be simple! First, you would also need to make sure your Audioengine Bluetooth device is on, in pair mode (LED light flashing), and near the turntable. Next, you would need to use the pairing button to send the turntable into pairing mode. Depending on […]
If the Bluetooth LED is illuminated orange that means you are streaming in aptX HD which is a higher grade of Bluetooth signal.
The W3 is a great way to make your S8 subwoofer wireless! The W3 kit comes with a sender unit and receiver unit. For use with an AV Receiver or Stereo Amplifier, you’ll need to connect the sender unit to the SUB or LFE output of your AV receiver. This is usually done with a […]
If you’ve connected your turntable to your speakers and the volume is low, one of two situations may be happening: If you have a turntable with a built-in phono preamp, such as the Audio-Technica ATLP120 or the Music Hall USB-1, the output may be in the wrong setting. Double check and make sure the switch […]
The B1 uses the Bluetooth drivers located on your computer, so you may need to ensure you’re using the most up to date drivers for your computer’s Bluetooth. We’d also recommend going to the manufacturer of your computers website, and see if they have Bluetooth drivers there.
Yes, you can still use the B1 with the original A5 model! With this kind of setup, you’d just need to use either an RCA to mini-stereo adapter (like the one that was included with your A5s) or an RCA to mini-stereo cable. You would just connect the RCA end into the RCA outputs of […]
You can absolutely still use the B1, and it will sound great. aptX® is a high quality Bluetooth audio codec that works really well. With that said, in addition to mandatory support for SBC, Bluetooth also includes optional support for many other codecs, like MPEG-1, MPEG-2, MPEG-4, and AAC, all of which have their own […]
AptX® keeps an up to date list of supported device on their site. See here, for supported smartphones: https://www.aptx.com/products?field_product_category_tid=126 And here, for supported tablets: https://www.aptx.com/products?field_product_category_tid=135
