There are a few notable differences but both designs function basically the same. “Active” and “powered” speakers refer to speakers with power amplifiers built into either one speaker or both. Audioengine speakers were designed with the power amps in the left speaker to make connections easier as they only require one power cord and all […]
Audioengine powered speaker models have a built-in power amplifier in the left speaker so you won’t need a stereo receiver or other extra components for power.
The A5+ Wireless uses the same amplifier design and woofers that the A5+ Classic does, so both the A5+ Wireless and the A5+ Classic should sound virtually the same. The biggest difference between the two is the added Bluetooth receiver built into the A5+ Wireless; we’ve added a 24-bit DAC built inside that connects any […]
No extra software or drivers are needed. The A5+ Wireless is compatible with any device that supports Bluetooth, and the A2DP profile for streaming stereo audio. This includes most smartphones, tablets, and computers.
There is an auxiliary input on the rear panel so you can directly connect any product with an audio output.
You can absolutely still use the A5+ Wireless and it will sound great. AptX is a high-quality Bluetooth audio codec that works really well. In addition to mandatory support for SBC, Bluetooth also includes optional support for many other codecs, like MPEG-1, MPEG-2, MPEG-4, and AAC, all of which have their own advantages, and some […]
Some turntables will need a preamp before being connected and others may have one built-in. With that in mind, it is best to check the turntable manufacturer’s website, the turntable’s user manual, or you can even try your turntable without the preamp first to see how it operates.
The following diagrams show the most common configurations for D2 Setup. Note: For maximum range, ensure that both antennae are upright. USB from your computer Step 1 — Connect the D2 Sender to your computer USB port. For PC, the D2 should be recognized automatically. For Mac, under System Preferences/Sound, select “Audioengine D2” Step 2 –- Connect the analog […]
Using stands like the DS1s and DS2s will angle the speakers upwards, which can be a positive thing depending as well as other variables in your setup. The closer the speakers tweeters are aimed to your ears, the more you will perceive higher frequencies, which are very directional, and using these stands can achieve this. […]
The cable included with our products is standard speaker wire (16 AWG), so you should be able to find something like this most anywhere that carries electronics or audio gear. 16 AWG should be good up to around 25 ft or so. If you’d like to go farther than that we’d recommend 14 AWG.
