If the left speaker is in an easy to reach location, you can certainly use the physical knob to set volume. If not though, it’s perfectly fine to set the speakers to a good volume and then adjust from your source moving forward. Every setup is different, so some experimentation will be necessary to find […]
Though overall latency can be affected by some external factors (including things like signal strength, how well the source device’s manufacturer has implemented it’s Bluetooth, and even simply from being physically further away from the speakers) Audioengine Bluetooth products have very low latency when compared to most Bluetooth receivers, 30ms or less. Here are some […]
Setting up your Bluetooth turntable with your Bluetooth-ready Audioengine speakers/components should be simple! First, you would also need to make sure your Audioengine Bluetooth device is on, in pair mode (LED light flashing), and near the turntable. Next, you would need to use the pairing button to send the turntable into pairing mode. Depending on […]
If you’ve connected your turntable to your speakers and the volume is low, one of two situations may be happening: If you have a turntable with a built-in phono preamp, such as the Audio-Technica ATLP120 or the Music Hall USB-1, the output may be in the wrong setting. Double check and make sure the switch […]
