Step 1: Connect the speaker wire from the HD3 Next Gen left (powered) speaker to the right (passive) speaker. Step 2: Attach the wireless antenna to the HD3 Next Gen rear panel. Step 3: Insert the power cable into the HD3 Next Gen rear panel and plug the other end into an AC power outlet. Wireless Connection […]
Here are two of the most common connection options to connect the S8 subwoofer to your music system, stereo receiver, or powered speakers. Music System to S8 Sub using mini-jack audio cable 1) Connect a 3.5mm mini-jack audio cable from an output of your stereo receiver, powered speakers, or any music system with an output, to […]
Setup is really simple. The W3 Sender needs power and an audio input (either USB audio or audio into the mini-jack input on the end of the Sender). The W3 Receiver also needs power and a place to send the audio to, such as Audioengine 5+ powered speakers or any audio system. There are many ways to use the […]
Step 1: Connect audio cables from the B1 rear panel to your music system audio input. Step 2: Connect the power adapter to B1 with the included power cable and plug the power adapter into an AC outlet. B1 will automatically go into pair mode and the Pair button on the B1 front panel should be flashing. Step 3: On […]
Step 1 – Placement Set the N22 amplifier on a solid surface and make sure there is plenty of ventilation and space around the amplifier top and bottom. The integrated stand is not designed to be removed as the N22 uses a passive convection system for heat dissipation. Keeping your N22 upright with the stand attached is important for optimal ventilation and […]
The following diagrams show the most common configurations for connecting your D3 from a computer’ USB port to headphones or any music system. Step 1: Connect the D3 to your computer’s USB port. For PC, the D3 should be recognized automatically. For Mac, under System Preferences/Sound, select “Audioengine D3” as the sound output. Step 2: Connect the […]
The following diagrams show the most common configurations for D1 Setup. USB from your computer Step 1 — Connect the D1 to your computer USB port. For PC, the D1 should be recognized automatically. For Mac, under System Preferences/Sound, select “Audioengine D1” Step 2 –- Connect the analog output of your D1 to any audio […]
Connecting your Speakers To connect your P4 speakers to a receiver or amp you will need 2-conductor stranded speaker wire. All Audioengine speakers use high quality, five-way gold plated binding posts that will accept heavy gauge bare wire, banana plugs, spade lugs, or pin terminators. We recommend your speaker wire be at least 16 gauge […]
Step 1: Connect the speaker wire from the HD6 left (powered) speaker to the right (passive) speaker. Step 2: Connect the wireless antenna to the HD6 rear panel. Step 3: Connect the power cable to the HD6 rear panel and plug the other end into an AC power outlet. Wireless Connection Step 4: Turn on the HD6 power switch […]
Step 1: Connect the Bluetooth antenna to the B2 rear panel. The B2 will not function without the antenna connected. Step 2: Connect the power cable to the b2 rear panel and plug the power cable into an AC outlet. Step 3: Turn on the B2 power switch, which is located on the rear panel. B2 will automatically go […]
