Simplified Setup: Audioengine A1MR Studio Monitors The Audioengine A1MR Studio Monitors offer two setup options depending on your needs: Wired Setup (2 minutes): For immediate use without streaming features, simply connect via the AUX/3.5mm jack and start podcasting, listening, or mixing audio right away—no app required. Important Note: When turning on the speaker, you’ll hear […]
Step 1: Connect the speaker wire from the HD5 left (powered) speaker to the right (passive) speaker. Step 2: Connect the wireless antenna to the HD5 rear panel. Step 3: Connect the power cable to the HD5 rear panel and plug the other end into an AC power outlet. Wireless Connection Step 4: Turn on the HD5 power switch located […]
The following diagrams show the most common configurations for connecting your DAC3 from a computer’ USB port to wired headphones or any music system. Step 1: Connect the DAC3 to your phone, tablet or computer’s USB-C port using the included cables. (Lightning to USB-C for iOS devices and USB-C for MacOS, Android and Windows). For PC, […]
For Android Devices For Apple Devices Step 1: Download the free Audioengine app from the Apple App Store for iOS or from Google Play for Android. A1-MR setup as well as multiroom and stereo configurations are done via the Audioengine app from an iOS or Android device. Step 2: Connect the included speaker wire from the […]
Step 1: Connect the speaker wire from the HD4 left (powered) speaker to the right (passive) speaker. Step 2: Attach the wireless antenna to the HD4 rear panel. Step 3: Insert the power cable into the HD4 rear panel and plug the other end into an AC power outlet. Wireless Connection Step 4: Turn on the HD4 power […]
Step 1: Connect the included speaker wire from the A1 left (powered) speaker to the right (passive) speaker, observing proper polarity to each speaker connector. Step 2: Verify that the volume/power knob on the rear panel of the left speaker is in the OFF position by rotating the knob until it clicks off.. Step 3: […]
Step 1: Download the free Audioengine app from the Apple App Store for iOS or from Google Play for Android. This is what you need to set up and configure your B-Fi. No need to install or open this app yet as we first need to connect B-Fi to your music system. Step 2: Connecting B-Fi to […]
Power ON/OFF To turn on your 512, press and hold the power button on the top panel for about 3 seconds, then release the button. The power button will light up and a sound will indicate that the speaker is on. Wireless Connection After charging the 512 battery, turn on the power. Press and hold […]
Step 1: Connect the included speaker wire from the A2+ left (powered) speaker to the right (passive) speaker, observing proper polarity to each speaker connector. 1) Use your thumb and finger to unscrew the binding post connectors on the back of each speaker. 2) Insert each speaker wire into the holes on the side of binding post connectors, […]
