Is it OK to remove the stand attached to the N22 and place the amp on it’s side?
The N22 needs to be kept upright with the stand attached for proper cooling.
Support Type: N22 Desktop Audio Amplifier
Is it possible to use the N22 amp to power the rear channels of my surround system?
Yes, the N22 amp + P4 passive speakers + W1 or W3 wireless stereo adapter will make a great-sounding wireless rear channel setup.
Can I connect a subwoofer to the N22?
Yes, simply connect the full-range output of the N22 into your sub’s line-level input. The sub and speaker volume can be controlled together by the N22 volume control.
Can I increase the length or change the speaker wire between the N22 and each speaker?
Sure. We’ve included two 5-foot, 16-gauge speaker wires with the N22 but any “stranded” speaker wire will work. The standard-size speaker binding posts on the back of the amp will accept bare stranded wire, however if you want to terminate the wires we recommend using spade or pin-type terminals.
Will my low impedance (low Z) Grado headphones work with N22?
Yes, the N22 will work well with headphones or earphones with an impedance from 16 to 300 ohms.