Support Type: HD6 Wireless Speakers

0.7″ (18 mm) thick MDF cabinets with real wood veneer1″ (26 mm) silk dome tweeters with neodymium magnets5.5″ (140 mm) aramid fiber woofers with advanced voice coils

Operating temperature: 32 degrees F to 95 degrees FNon-operating temperature: -4 degrees F to 113 degrees FRelative humidity: 5% to 95% non-condensing

Dimensions (HWD)Left speaker (active)Dimensions: 11.75″ (30 cm) x 7.25″ (18.5 cm) x 10″ (25 cm)Right speaker (passive)Dimensions: 11.75″ (30 cm) x 7.25″ (18.5 cm) x 10″ (25 cm) WeightLeft (active) – 17.5 lb (8 kg)Right (passive) – 12.5 lb (5.5 kg) Total Shipping Weight33.5 lb (15 kg) Shipping Box Dimensions (LWH)20″ (51 cm) x 15″ […]

Internal D/A converterAKM AK4396 Input Bit Depthup to 24 bit native Sample Rateup to 192 kHz native

Connector TypeN/A USB Device ClassN/A Input Bit DepthN/A Input Sample RateN/A

Internal D/A ConverterAKM AK4396 Internal BT ReceiverN/A Input Bit Depth24 bit (padded) Bluetooth Receiver TypeBluetooth 5.0 Supported CodecsaptX HD, aptX, AAC, SBC Supported Bluetooth ProfilesN/A Wireless Operation RangeUp to 100 ft (30 m) typical Input Data RateDetermined by Bluetooth Wireless Latency~30 milliseconds (ms)

TypePowered Bluetooth aptX HD speaker system Amplifier TypeClass AB Rated Power Output:50W RMS per channel (measured in compliance with 16 C.F.R. § 432.3)Peak Power Output: 75W per channel (AES)Total Peak Power Output: 150W (AES) Drivers5.5″ aramid fiber woofers 1″ silk dome tweeters Inputs3.5 mm stereo mini-jack, RCA L/R, digital optical (SPDIF,) Bluetooth aptX OutputsRCA variable line-out Input […]

All digital audio sources will ultimately need to be converted to analog to provide sound through any speaker system. Any optical/Bluetooth input will pass the digital signal on to the HD6’s internal digital-to-analog converter (DAC), while the RCA/3.5mm inputs are already analog and have been converted by the built-in DAC in your source. So it’s […]

Once you have set up your HD6 speakers, turn them on using the power switch on the rear panel. The speakers will automatically enter their “pairing mode” when first turned on.  The Bluetooth LED on the back of the powered speaker will blink during this time frame. While the LED is flashing, go into your […]

The Bluetooth 5.0 receiver found in the latest builds of the HD6’s will support the following Bluetooth codecs:  SBC, AAC, aptX, and aptX HD.