Table of Contents Introduction When choosing a high-quality home music system, both Bose and Audioengine are prominent names in the industry. However, while the Bose Music Wave has been around for decades, the Audioengine B2 Home Music System offers a more modern take on premium audio. This comparison aims to delve into the specifics of each system, […]
To minimize unwanted resonances and distortion, Audioengine cabinets have thick high-resin MDF walls with extensive internal bracing. Heavy internal sound-damping material is also used to reduce unwanted sound reflections inside the cabinet. The B2 cabinet is a unique design in that it has dual sub-enclosures to prevent cross-interference, while each side contains its own tuned, […]
0.7″ (18 mm) thick MDF cabinets with real wood veneer0.75″ (20 mm) silk dome tweeters with neodymium magnets2.75″ (70 mm) aramid fiber woofers with advanced voice coils
Dimensions (HWD)4.25”(10.8 cm) x 12.25”(31.1 cm) x 5.50”(14 cm) Weight6 lb (2.7 kg) Total Shipping Weight10 lb (4.6 kg) Shipping Box Dimensions (LWH)16” (40.6 cm) x 7.5” (19.1 cm) x 10.5” (26.7 cm)
Headphone Amp TypeN/A Full-scale Headphone Output LevelN/A Output ImpedanceN/A Recommended Headphone Impedance LevelN/A
Connector TypeN/A USB Device ClassN/A Input Bit DepthN/A Input Sample RateN/A
Internal D/A ConverterPCM 5102 Internal BT ReceiverN/A Input Bit Depth16 bit Bluetooth Receiver TypeBluetooth 5.0 Supported CodecsaptX, AAC, SBC Supported Bluetooth ProfilesN/A Wireless Operation RangeUp to 100 ft (30 m) typical Input Data RateDetermined by Bluetooth Wireless Latency~30 milliseconds (ms)
TypePowered Bluetooth aptX speaker Amplifier TypeClass D Rated Power Output:15W RMS per channel (measured in compliance with 16 C.F.R. § 432.3)Peak Power Output: 30W per channel (AES)Total Peak Power Output: 60W (AES) Drivers2.75” aramid fiber woofers 0.75“ Silk dome tweeters Inputs3.5 mm stereo mini-jack, Bluetooth OutputsN/A Input Voltages100-240 V 50/60 Hz auto-switching SNR>95 dB (typical A-weighted) THD+NLess […]
If you have recently purchased a B2 and you cannot find the antenna or antenna post on the back of the unit, don’t worry! Starting in 2021, we made some updates to the B2 cabinet. One of those changes was mounting the antenna inside of the speaker cabinet. So if you do not have an […]
If your B2 speaker sounds distorted, is buzzing, or just doesn’t sound quite right, we’d recommend the following troubleshooting steps: Start with power cycling your B2 by turning it off and then back on. From there: Determine if the distortion is due to your source by disconnecting all source devices from the speakers. Please make […]
