6 Simple Wireless Speaker Shopping Tips So you’ve decided to make the leap from wired to wireless music and might have made the mistake of Googling “Best Wireless Speakers.” We here at Audioengine know how overwhelming this can be and we extend our deepest sympathies. But it’s time to put your concerns to rest as we’re here […]
Speaker Setup – How to break in new speakers. So you just got your brand new Audioengine speakers and you’re ready to pull them out of the box and get them set up so you can start rocking out. Straight out of the box, your speakers should sound great, but what if your speaker setup could sound […]
You can do this using powered speakers like our A2+s, HD3s, HD4s, A5+s, and HD6s. For this, you’ll connect the W3 sender to the RCA output on the left speaker, using a 3.5mm stereo-mini to RCA “Y” cable. Then connect the W3 Receiver to the input on your S8. You can either use a 3.5mm […]
Applicable to our A2+, HD3, and HD4 speaker models All digital audio sources will ultimately need to be converted to analog to provide sound through any speaker system. The USB and Bluetooth inputs will pass the digital signal on to the speaker’s internal digital-to-analog converter (DAC), while the RCA/3.5mm inputs are already analog and […]
‘-Both analog (3.5mm mini-jack and RCA) inputs are “open” or active, so you can leave 2 audio sources plugged in at the same time. -The USB (Optical for HD6) and the Bluetooth module share the same DAC (Digital to Analog Converter) If connected to both, the Bluetooth connection will take precedence. If you’re using USB […]
