How to Connect a Turntable to Audioengine Speakers Even though records can be seen by some as an archaic music format, the truth is vinyl is still alive and well with many young people collecting vinyl records that were either handed down from their parents or found in a bin of used records at their […]
0.7″ (18 mm) thick MDF cabinets0.75″ (20 mm) silk dome tweeters with neodymium magnets2.75″ (70 mm) aramid fiber woofers with advanced voice coils
Operating temperature: 32 degrees F to 95 degrees FNon-operating temperature: -4 degrees F to 113 degrees FRelative humidity: 5% to 95% non-condensing
Dimensions (HWD)Each speaker – 6″ (15.2 cm) x 4″ (10.2 cm) x 5.25″ (13.3 cm) WeightLeft (active) – 3.6 lb (1.6 kg)Right (passive) – 3.2 lb (1.4 kg) Total Shipping Weight10 lb (4.6 kg) Shipping Box Dimensions (LWH)15” (38.1 cm) x 7” (17.8 cm) x 10.5” (26.7 cm)
Connector TypeMicro-USB USB Device Classtype 1.1 and above Input Bit Depthup to 16 bit native Input Sample Rateup to 48 kHz native. Internal D/A Converter
Internal BT ReceiverQualcomm QCC 3031/3034 Input Bit Depth16 bit Bluetooth Receiver TypeBluetooth 5.3 Supported CodecsaptX, AAC, SBC Supported Bluetooth ProfilesN/A Wireless Operation RangeUp to 100 ft (30 m) typical Input Data RateDetermined by Bluetooth Wireless Latency~30 milliseconds (ms)
TypePowered Bluetooth aptX speaker system Amplifier TypeClass AB Rated Power Output:15W RMS per channel at 4 ohms (measured in compliance with 16 C.F.R. § 432.3)Peak Power Output: 30W per channel at 4 ohms (AES)Total Peak Power Output: 60W (AES) Drivers2.75” aramid fiber woofers 0.75“ Silk dome tweeters Inputs3.5 mm stereo mini-jack, RCA L/R, USB, Bluetooth OutputsRCA variable […]
While the DAC in the A2+ Wireless is better than what is built into most computers, adding a 32-bit DAC, such as our D1, D1P or DAC3, would still be a benefit to audio quality.
The headphone outputs on many computers will sound great with the A2+ Wireless. Some do have poor audio quality though, so if this is the case for your computer, try connecting from the USB port to your with A2+ Wireless, or connect wirelessly via Bluetooth.
Yes! If your tablet or smartphone has a USB output and supports USB audio (refer to the manufacturers’ documentation), then it will work with A2+ Wireless’s USB input. You’ll most likely also need an OTG adapter cable to connect from your tablet to the USB input on the A2+ Wireless. These are generally available from […]
