Support Type: A2+ Powered Speakers

The A2+s do not include detachable magnetic grills.

All you would need to do is connect the variable output of the A2+ into the input of your sub using RCA cables.

You wouldn’t be able to use a pair of headphones directly with the A2+s; in order to use headphones with the A2+s, you would need to include something with a dedicated headphone amp, such as our D1. All you would need to do is plug the D1 into your computer (either with an optical or […]

In the new A2+, we’ve included a linear limiter which will manage the bass at the point where bass distortion starts to occur. Being a linear limiter, it will not chop the signal but instead retains the shape of the waveform, not allowing it to go into distortion. This means if you listen to the […]

Yep, an AC wall outlet near the A2+ is all you need to power the AW3 wireless Receiver.

Some turntables will need a preamp before being connected and others may have one built-in. With that in mind, it is best to check the turntable manufacturer’s website, the turntable’s user manual, or you can even try your turntable without the preamp first to see how it operates.

Sure, for A2+ you will need an inverter that can supply about 50-60 watts.

We researched adding a bamboo version to the A2+ line, but found that the speaker size is actually too small and costly to produce them in bamboo using the same process as with our A5+ and P4 speakers.

Here are the upgrades made to the A2+: USB digital-to-analog converter (DAC) Variable audio output (connect a subwoofer or wirelessly send audio to other speakers with our optional W3 wireless adapter) Upgraded speaker connectors Upgraded power supply Upgraded accessory cables