N22 General specifications
Type
Compact Integrated Stereo Amplifier
Rated Power Output: Speaker 2x52W @ 4Ohms; HP: 2.8 Vrms; RCA : 1.5Vrms. (measured in compliance with 16 C.F.R. § 432.3)
Peak Power Output: 104W per channel at 4 ohms (AES)
Amplifier type
Class D TDA 7492 amplifier
Input voltages
100-240AC/50Hz
Inputs
RCA, 1/8″ (3.5mm) mini-jack, USB-C, and Bluetooth aptX
Outputs
RCA, Speaker, HP, and Line-out
Speaker outputs
5-way binding posts
SNR
90dB @ input 1Khz 100mV
THD+N
0.055% @ input 1Khz 100mV
Crosstalk
-52dB
Frequency response
20Hz-20kHz
Input impedance
100Ohm
Input sensitivity
Bluetooth: 0dBfs; MiniJack: 1Vrms; RCA: 1.3Vrms
Protection
Output current limiting, thermal over-temperature, power on/off transient protection
Headphone amplifier
OPA1602
Dimensions
7″(H) x 2.75″(W) x 5.5″(D)
Weight
3.55 lbs (1.6kg)
Shipping weight
5.0 lbs (4.6kg)
Shipping box dims
11.5″(H) x 7.5″(W) x 9.5″(D)
Finish
Satin Black
Upstanding design
The vertical design of the N22 with its integrated stand allows the 52 watt/per channel stereo class D TDA 7492 amplifier to run cool through passive convection without a fan or massive heatsink. The N22 fits easily on your desk and doesn’t take up much space.
Discrete headphone amplifier
For headphone enthusiasts the N22 includes a high-performance, low-noise discrete amplifier which works well with all types of headphones and earphones.
Variable line out
The N22 includes a variable preamp output so you can connect a subwoofer, external amplifier, or Audioengine wireless adapter and control the volume of the line-out from the front panel.
Simple operation
Both audio inputs on the N22 are active so two audio sources may be connected to the amplifier at the same time without the need for an input switch. A standby idle mode is also included to conserve power when you’re not playing music.
Wireless rear speakers
Use the N22 amp, Audioengine P4 passive speakers, and our W3 wireless adapter for a low-cost but great-sounding wireless rear channel setup for your home theater.